Rotary dryer
The rotary cylinder drying system is composed of hot air type drying media generation device (coal, oil, gas, steam, electricity), rotary cylinder dryer, separation equipment (combination of cyclone separator, bag filter, wet dust collector), fan, control system, etc. It is generally used for continuous operation and can be used for intermittent operation such as calcination after modification. It is generally used for continuous operation, but after modification it can be used for intermittent operation such as calcination. The new rotary cylinder dryer is a combined copying structure with self-cleaning function added to the old rotary cylinder dryer, which can handle viscous materials, paste-like materials, and even liquid materials, and retains the advantages of large processing capacity and stable operation of the rotary cylinder.
Working principle
The dryer is equipped with combined copying plate structure inside, which has self-cleaning function. When the wet material enters the dryer, the high wet material is copied by the rotating When the wet material enters the dryer, the highly wet material is copied to the top by the copying plate on the rotating cylinder wall and falls down, and the movement is generated along the combined copying plate while the cylinder is rotating. The materials on the inner wall of the cylinder and the surface of the plate are cleaned up automatically without adding extra power device, which effectively overcomes the shortcomings of material scarring, sticking to the wall and producing large pieces. This effectively overcomes the shortcomings of material scarring, sticking to the wall and producing large pieces. In the process of repeatedly copying up and falling down, the material is in full contact with the hot air to complete heat and mass transfer and realize the drying process, Drying process.
Certifications
| Type |
Drum speed(≤r/min) |
Cylinder slope(%) |
Inlet temperature(°C) |
Electromotor(KW) |
Production(kg/h) |
| GYT06 X 6 |
3-6 |
2-5 |
100-800 |
7.5 |
20-150 |
| GYT0.6 X 10 |
11 |
20-200 |
| GYT0.8 X 6 |
11 |
30-250 |
| GYT0.8 X 10 |
11 |
30-270 |
| GYT1.0 X 10 |
15 |
40-450 |
| GYT1.0 X 12 |
15 |
40-470 |
| GYT1.5 X 12 |
18.5 |
80-1200 |
| GYT1.5 X 15 |
22 |
80-1500 |
| GYT2.2 X 15 |
22 |
150-3000 |
| GYT2.2 X 18 |
37 |
150-3500 |
| GYT2.4 X 18 |
2.5-6 |
45 |
200-4000 |
| GYT2.4 X 20 |
45 |
200-5000 |
| GYT2.8 X 24 |
55 |
500-5000 |
| GYT3.2 X 25 |
110 |
600-10000 |
Application materials:
It is used for drying the materials with less viscosity or non-viscous materials and better liquidity under certain moisture content. For example: drying of choline chloride powder, amino acid, solid white alcohol, palm oil residue, Conaldehyde residue, fruit residue, livestock and poultry manure, quartz sand, dry-mixed mortar, sodium sulfate, ammonium sulfate, potassium sulfate, potassium chloride, slag mineral powder, etc.
1. According to the operating experience, the transmission device and the cylinder structure are improved, which greatly reduces the equipment investment and power consumption.
2. According to the needs of the rotary cylinder dryer after transformation to achieve the integrated design of drying, screening, return material.
3. Improve the structure of the equipment to avoid the low thermal efficiency of drying caused by air leakage and poor material lifting.
4. Simple operation, stable operation and long life of the equipment.
5. Low running cost and high thermal efficiency.
6. Good product quality and high output of single machine.
1. What data is required to confirm the model?
(1) Materials to be dried (2) Treatment capacity per hour (3) Moisture requirements before and after drying
2. What certificates do you have?
We can provide CE,, etc.
3. What is the warranty period of the equipment?
Normally 1 year warranty.
4. Can we visit your factory?
Of course, we sincerely invite you to visit, if it's not convenient for you, you can visit our factory and solve problems through
video conference.
5. Can we bring our own materials to your factory for experiments?
Of course, you are welcome at any time. We will arrange professional engineers and technicians to do experiments and analyze data
for you on site.
6. Can it be customized?
Of course, our equipment can be customized according to the actual requirements of customers.
7. How long is the construction period?
It's about 30 days, but it also needs to be determined according to the specific equipment model, order number, etc., But if you
need it urgently, please let us know, we can arrange the factory to rush production
Audited Supplier 
){kind=link}
){kind=link}